← Back to blog

Executive Marketing Summary for Dealerships: What to Include

November 11, 2026
Executive Marketing Summary for Dealerships: What to Include

An executive marketing summary is the first page of a marketing report, written so a general manager or dealer principal can decide where to add money, where to cut and what to fix without reading anything else. For a dealership, it states the period, total spend, leads, appointments, units sold, cost per sale and one recommended action, and it says plainly how much of that the data can prove.

This guide covers what the summary should contain, a one-page format you can adapt, a worked example, how to keep it honest, and how to end it with a decision instead of a pile of metrics.

Autoroiq
Make Marketing Spend Clearer
AutoROIQ provides independent analysis and executive-level recommendations to help dealership leaders understand where marketing budgets are working.
Explore AutoROIQ

TL;DR

  • Lead with the decision. State the recommendation, the two or three strongest reasons and the ask, then show the numbers.
  • Cover the full chain: spend, leads, contacted leads, appointments, showroom visits and sold units, for one period and one source of truth.
  • Report cost per sale and lead-to-sale rate before cost per lead, and show the share of sales you could not attribute.
  • Keep it to one page: a short table, trend comparisons and, at most, one or two charts.
  • Review monthly, with a quarterly rollup for groups, and judge channel changes over 60 to 90 days.

Table of Contents

What an executive marketing summary is

A general executive summary is a concise, stand-alone document for top-level managers. According to the UMGC Effective Writing Center, it covers the report's purpose, the problem, the analysis methods, the results and the recommendations. The same source points out that it may be the only section decision-makers read, so it should be concise, complete, free of uncommon terminology and able to stand on its own.

In a dealership, that principle becomes specific. The audience is a GM, owner or dealer principal who has a store to run. The summary exists to answer three things: what worked, what did not, and what to do next. If a leader can read it in five minutes and know where the next dollar goes, it has done its job.

That is different from a vendor dashboard. A vendor report summarizes the vendor's own activity: impressions, clicks, form fills. An executive marketing summary summarizes the dealership's results across every channel and ties them to sold units and gross profit.

What an executive marketing summary is

The decisions it should support

Before choosing any metric, decide which decisions the page serves. For most franchise stores, there are five:

  1. Scale: which channels return enough sold units and gross to deserve more budget.
  2. Maintain: which are performing near plan and need no change.
  3. Revise: which show promise but have a fixable problem, such as slow lead response or a weak landing page.
  4. Stop: which spend cannot be connected to sales after a fair test period.
  5. Hold vendors to account: whether a vendor's claims match what the CRM and DMS show.

A useful pattern from a published automotive report template is to end every performance table with one decision: scale, maintain, revise or stop. It also recommends putting a one-page executive summary first and using the remaining pages to prove the numbers behind it. That order matters. The summary makes the case, and the appendix defends it.

What to include, field by field

The same template lists the opening elements of a dealership summary: the period, total spend, total leads, sold units influenced, cost per sale and the top action. Those six fields are a good minimum. Add the following so the page works as a decision document.

FieldWhat it tells the readerNotes
PeriodThe window covered and the comparison windowShow prior month and the same month last year
Total spendAll marketing cost, by channelUse one ad-platform spend total, not each vendor's own figure
LeadsVolume by sourceQualified leads, with duplicates and invalid contacts removed
Appointments and showsWhether leads become visitsInclude appointment-set rate and show rate
Sold unitsUnits traced to a lead recordState the traced share and the unattributed share
Cost per saleMarketing spend per delivered unitThe number leadership should anchor on
Marketing ROIReturn on spendAttributed gross profit minus marketing cost, divided by cost
Budget varianceActual versus planned spendFlag overspend early
Top win, top riskThe one result to repeat and the one to fixOne line each
Decision neededWhat you are asking leadership to approveOne clear ask with a timeline

The formulas behind the fields

The template defines the core KPIs plainly: cost per lead is media spend divided by qualified leads, and marketing ROI is attributed gross profit minus marketing cost, divided by marketing cost, times 100. Budget variance is actual spend minus planned spend. Contact rate, appointment-set rate, show rate and lead-to-sale rate are the step-by-step conversion rates between stages.

Marketing KPI formulas and lead conversion stages

Write the formulas once, in a footnote or appendix, and apply them the same way every period. A summary loses credibility the moment a definition quietly changes between months.

Why cost per sale comes first

Cost per lead is easy to produce and easy to misread. A cheap lead that never reaches the lot is not cheap. Our own explanation of cost per lead versus cost per sale walks through why the two numbers can point in opposite directions.

Auto Dealer Today makes a related point in its piece on ROI reporting. Leadership should not cut a source only because its cost per lead is higher. Source-level results have to be connected to sales, gross and lead handling, because a cheaper lead can produce less business. Though that article dates from 2009, the logic holds for how a summary should rank channels.

Put your spend in context

A summary reads better when the leader can see how the store compares with the industry. NADA data reported by Dealership Guy shows dealer ad spending reached $9.96 billion in 2025, with digital media at 74.9% of the total. Inside Radio reports that the average dealer spent $739 on advertising for each new vehicle sold in 2025, up $34 from a year earlier, and that the typical new car dealership spent $586,246 on advertising.

Use figures like these in one line of context, not as a target. Your store's mix, market and brand will differ. For a deeper look at how to read your own numbers against peers, see our dealership marketing benchmarks.

A one-page format you can copy

This layout works for a monthly leadership review. It fits one page and keeps the decision at the top.

  1. Headline and recommendation. Two sentences: what happened and what you recommend.
  2. Reasons. Two or three, each with one number.
  3. KPI table. This period, prior period and target for spend, leads, appointments, shows, sold units, cost per sale and ROI.
  4. Channel table. Each channel's spend, leads, sales and cost per sale, with a trend arrow against last month and last year.
  5. Top win, top risk. One line each.
  6. Data confidence. Traced versus unattributed sales, and any late or missing data.
  7. Budget versus plan. Variance, and the proposed reallocation.
  8. Decision needed and next 30 days. The ask, an owner and a date.

The structure matches common report formats: a one-page dashboard that holds an executive summary, a KPI table against the prior period and target, channel performance, findings, recommendations and budget versus plan.

An illustrative example

The numbers below are invented to show the format. They are not benchmarks and not data from any store.

Period: October versus September and October last year.

Recommendation: Move $6,000 per month from display to search and third-party listings for the next 60 days, and fix after-hours lead response before adding any new spend.

Why: Search produced 41 traced sales at a lower cost per sale than any other paid channel. Display produced leads at a low cost per lead but only 3 traced sales. After-hours leads waited a median of 14 hours for a first response.

Data confidence: 71% of sold units are traced to a lead record. 29% are unattributed, mostly walk-ins and phone-ups with no source recorded.

Ask: Approve the reallocation by the 15th. We will review at 60 days.

That is under 120 words, and a GM can act on every line.

How to summarize without overstating

The quickest way to lose a leadership team is to present numbers the data cannot support. A few practices keep the summary defensible.

Show the unattributed share

Sold units should be traced to a lead record, not modeled. LeadLocate, a dealership attribution publisher, argues that if 40% of sales cannot be traced, that is a finding to act on, not something to hide. Publishing the unattributed share every month is what separates a report people trust from one they argue with. Our guide to lead source attribution explains how to improve that share over time.

Mark what is missing

When DMS updates are late or records do not match, say so. G4 Media's scorecard guidance advises marking missing results, late DMS updates, unmatched records and estimated gross instead of quietly substituting zeros or averages. A visible asterisk costs you nothing. A hidden estimate costs you the room.

Use one source of truth

Use one reporting period, one CRM export, one ad-platform spend total and one definition of a sold or serviced outcome. If two vendors each claim the same sale, the summary has to resolve it once, with a stated rule, not report both.

Separate marketing from process

Weak results are not always a channel problem. If response time is slow, contact rate is weak or show rate is poor, spend will look worse than it should. Put those process metrics in the summary so leadership sees whether the store can act on the demand it buys. For service, the same logic applies from spend to bookings to completed repair orders, which we cover in service appointment attribution.

Ask what a metric would change

A metric earns its place only if it could change a budget decision. Forty metrics are the same as none. One published dashboard recommendation is eight numbers: spend by channel, leads by source, cost per lead by source, time to first response, contact rate, follow-up touches, appointments set and shown, and sold units traced to a lead. Our own list of executive marketing metrics and our approach to KPI trees can help you choose which ones belong on the page.

Bullets, tables and charts

Yes, an executive summary can use all three, with limits. Bullets suit the reasons and the next steps. A table suits the numbers, because leaders compare rows. The most practical recommendation is a short table of each channel's spend, leads, sales and cost per sale, with trend arrows against last month and last year, plus one or two charts only where a picture shows something the table cannot.

The reasoning is about attention. Short reports get read and acted on, and long reports full of charts get skimmed. A short page also forces the writer to decide what matters, which is a large part of the value.

A few formatting rules help:

  • Put the recommendation above the first table.
  • Write in plain terms. Spell out an acronym the first time if a non-marketer will read it.
  • Use the same column order every month so trends are easy to see.
  • Keep detailed channel tables, creative results and vendor screenshots in an appendix.

From findings to a budget recommendation

The step many summaries skip is the ask. A strong recommendation has four parts: a specific recommendation, two or three of the strongest reasons, the assumptions or risks, and one clear ask with a timeline.

Compare these two lines:

  • Weak: Paid search performed well and display underperformed this month.
  • Strong: Shift $6,000 per month from display to search for 60 days, because search drove the most traced sales at the lowest cost per sale. The risk is lower volume at the top of the funnel. Approve by the 15th.

The second line can be approved, rejected or modified. The first cannot. Pair each recommendation with a decision label (scale, maintain, revise or stop) so leadership sees the action at a glance.

Give changes time to show up. Auto Dealer Today recommends reviewing ROI reports weekly and, where possible, monitoring results for 60 to 90 days before adjusting advertising or marketing. Put that window in the summary so nobody expects a verdict from one week of data.

If your reports run on vendor-supplied numbers, our guide to dealership ROI reporting shows how to move from lead counts to profit.

How often to prepare it

Monthly works for most stores, because it matches the close of the books and gives enough volume to see trends. Dealer groups often add a quarterly rollup by rooftop, brand, market and department. Weekly views suit the marketing team and the BDC, but leadership rarely needs them. Keep the structure identical across periods so a quarter is simply three months stacked.

A full review is a different exercise. If you cannot trust the inputs, start with a dealership marketing audit before building the monthly page.

Perspective: why the summary should be independent

We read a lot of vendor reports, and most of them are accurate about what the vendor did. The trouble is that each one describes the dealership's results through that vendor's own lens. Put three of them on a GM's desk and you get three different answers to the same question.

That is why we think the executive summary should be written from the dealership's own data and by someone with no advertising to sell. We do not sell advertising, manage campaigns or take commissions from vendors. Our analysis is built to clarify where marketing dollars are working, and our scorecards are designed to give leadership defensible numbers for vendor conversations.

A good summary does not hide uncertainty, and it does not bury a decision under charts. It tells the leader what to scale, what to stop and what is still unproven. When the unattributed share is visible and the recommendation is specific, the team stops debating the report and starts acting on it.

AutoROIQ

Get an independent summary for your store

If your leadership team is working from conflicting vendor reports, we can build the executive view for you. Our Marketing Intelligence Review evaluates vendors and channels against dealership outcomes and delivers executive-level recommendations, and our ongoing strategic advisory keeps that view current. Details are on our Marketing Intelligence Review and advisory page.

Autoroiq

We also offer a TV/OTT marketing audit and contract negotiation support with vendors. To see how we work, visit AutoROIQ or browse our marketing intelligence insights.

FAQ

What is another term for an executive summary?

Common alternatives are executive brief, management summary, overview and summary of findings. In dealership reporting, many teams simply call it the one-page leadership report. The name matters less than the contents: the conclusion, the reasons and the decision needed.

What are the parts of an executive marketing summary?

For a dealership, five parts cover the essentials: the period and headline results, the spend and the outcomes it produced, the key finding or risk, the data confidence note, and the recommendation with a timeline. A KPI table and a channel table support them. Add budget versus plan if leadership approves spend.

Can an executive summary have bullet points?

Yes. Bullets work well for reasons, risks and next steps because leaders can scan them. Keep the recommendation itself in a full sentence, and keep numbers in a table, not in long bulleted lists.

How long should it be?

One page. The UMGC guidance describes a summary as concise and able to stand alone, and a short page also forces you to decide what matters. If you need more space, the extra material belongs in an appendix that backs up the page.

How is a marketing plan executive summary different from a performance summary?

A plan summary looks forward: goals, budget, channels and expected results. A performance summary looks back at what spend produced and recommends changes. The format overlaps, but the performance version leans on traced sales, cost per sale and a clear statement of what the data cannot prove.

Sources